Low

MCP3424-E/ST - 

Analogue to Digital Converter, Quad, 18 bit, 3.75 SPS, Single, 2.7 V, 5.5 V, TSSOP

MICROCHIP MCP3424-E/ST

Image is for illustrative purposes only. Please refer to product description.

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
MCP3424-E/ST
Order Code:
1630423
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-40°C
:
18bit
:
TSSOP
:
Single
:
125°C
:
3.75SPS
:
I2C
:
14Pins
:
Quad 8-Bit Sigma-Delta ADCs
:
-
:
2.7V
:
Each
:
5.5V
:
Differential
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The MCP3424-E/ST is a 4-channel low-noise high accuracy delta-sigma A/D Converter with differential inputs and up to 18-bit of resolution. The on-board precision 2.048V reference voltage enables an input range of ±2.048V differentially. The device uses a two-wire I²C™ compatible serial interface and operates from a single power supply ranging from 2.7 to 5.5V. The MCP3424 device performs conversions at rates of 3.75, 15, 60 or 240 samples per second depending on user controllable configuration bit settings using the two-wire I²C™ compatible serial interface. The I²C™ address is user configurable with two address selection pins. This device has an onboard programmable gain amplifier (PGA). User can select the PGA gain of x1, x2, x4 or x8 before the analogue-to-digital conversion takes place. This allows the MCP3424 device to convert a smaller input signal with high resolution. The device has continuous and one-shot mode.
  • Differential input operation
  • Onboard voltage reference with 15ppm/°C drift
  • Onboard PGA
  • INL 10ppm of FSR maximum
  • 135µA at 3V Low current consumption
  • One-shot or continuous conversion options
  • Onboard oscillator

Applications

Portable Devices, Consumer Electronics, Sensing & Instrumentation, Automation & Process Control

Warnings

ESD sensitive device, take proper precaution while handling the device.