AD5622YKSZ-1500RL7

AD5622YKSZ-1500RL7 is a nanoDAC® family, single channel, 12bit buffered voltage-out digital-to-analogue converter (DAC) that operates from a single 2.7V to 5.5V supply, consuming <lt/>100µA at 5V. It uses a 2-wire I²C compatible serial interface that operates in standard (100KHz), fast (400KHz), and high-speed (3.4MHz) modes. The references for the device derive from the power supply inputs to give the widest dynamic output range. This device incorporates a power-on reset circuit that ensures the DAC output powers up to 0V and remains there until a valid write takes place to the device. This device contains a power-down feature that reduces the current consumption of the devices to <lt/>150nA at 3V and provides software-selectable output loads while in power-down mode. Applications include process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

• 2.7V to 5.5V power supply, guaranteed monotonic by design
• Power-on reset to 0V with brownout detection, 3 power-down functions
• On-chip output buffer amplifier, rail-to-rail operation
• Relative accuracy is ±2LSB maximum at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Differential nonlinearity is ±1LSB maximum at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Offset error is ±0.063mV typical at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Gain error is ±0.0004% of FSR typical at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Slew rate is 0.5V/µs typical at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Output noise spectral density is 120nV/Hz typical at (VDD = 2.7V to 5.5V, RL = 2Kohm to GND)
• Operating temperature range from -40°C to +125°C, 6-lead SC70 package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party