MX25V8035FM1I

MX25V8035FM1I is a 8Mbit serial NOR flash memory, which is configured as 1,048,576 x 8 internally. When it is in four I/O mode, the structure becomes 2,097,152 bits x 4 or 4,194,304 bits x 2. MX25V8035F features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus while it is in single I/O mode. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input. When it is in two I/O read mode, the SI pin and SO pin become SIO0 pin and SIO1 pin for address/dummy bits input and data output. When it is in four I/O read mode, the SI pin, SO pin, WP# pin and HOLD# pin become SIO0 pin, SIO1 pin, SIO2 pin and SIO3 pin for address/dummy bits input and data output. The MX25V8035F MXSMIO® (Serial Multi I/O) provides sequential read operation on the whole chip.

• Unique ID and secure OTP support
• Multi I/O support - single I/O, dual I/O and quad I/O
• Program suspend/resume & erase suspend/resume
• Low power consumption
• Minimum 100,000 erase/program cycles
• 20 years data retention
• Latch-up protected to 100mA from -1V to Vcc +1V
• 2.3V-3.6V for read, erase and program operations
• Temperature range from -40°C to 85°C
• Available in a 8 pin SOP (150mil) package