AD5601BCPZ-RL7

AD5601 is a single channel, 8bit, buffered voltage output DAC that operate from a single 2.7V to 5.5V supply, consuming typically 75µA at 5 V. Their on-chip precision output amplifier allows rail-to-rail output swing to be achieved. This device utilizes a versatile 3-wire serial interface that operates at clock rates upto 30MHz and is compatible with SPI, QSPI™, MICROWIRE™, and DSP interface standards. It is derived from the power supply inputs and, therefore, gives the widest dynamic output range. The parts incorporates a power-on reset circuit, which ensures that the DAC output powers upto 0V and remains there until a valid write to the device takes place. It is used in applications such as voltage level setting, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators.

• Guaranteed monotonic by design
• Power-on reset to 0V with brownout detection
• Power-down typically to 0.2µA at 3V
• Low power serial interface with Schmitt-triggered inputs
• SYNC interrupt facility, minimized zero-code error
• Relative accuracy is ±0.5LSB maximum at (VDD = 4.5V to 5.5V)
• Differential nonlinearity is ±0.5LSB maximum at (VDD = 4.5V to 5.5V)
• Gain temperature coefficient is 2ppm FSR/°C typical at (VDD = 4.5V to 5.5V)
• Slew rate is 0.5V/µs typical, noise is 2µV rms typical
• Operating temperature is -40°C to +125°C, package style is 6-lead LFCSP

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party