AD9148BBCZ

AD9148BBCZ is a quad, 16bit, high dynamic range, digital-to-analogue converter (DAC) that provides a sample rate of 1000MSPS. This device includes features optimized for direct conversion transmit applications, including gain, phase, and offset compensation. A serial peripheral interface (SPI) is provided for the programming of the internal device parameters. Full-scale output current can be programmed over a range of 8.7mA to 31.7mA. The device operates from 1.8V and 3.3V supplying a total power consumption of 3W at the maximum sample rate. It is used in applications such as wireless infrastructure, LTE, TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM MIMO/transmit diversity, and digital high or low IF synthesis.

• Novel 2×, 4×, and 8× interpolator eases data interface
• On-chip fine complex NCO allows carrier placement anywhere in DAC bandwidth
• High performance, low noise PLL clock multiplier, multiple chip synchronization interface
• Programmable digital inverse sinc filter, auxiliary DACs allow for offset control
• Gain DACs allow for I and Q gain matching, programmable I and Q phase compensation
• Digital gain control, flexible LVDS digital I/F supports 32- or 16-bit bus width
• Differential nonlinearity is ±2.1LSB typ at (AVDD33 = 3.3V, IOVDD = 3.3V)
• Gain error (with internal reference) is ±2% FSR typ at (AVDD33 = 3.3V, IOVDD = 3.3V)
• Reference voltage is 30ppm/°C typical at (AVDD33 = 3.3V, IOVDD = 3.3V)
• Operating temperature range from -40°C to +85°C, 196- ball CSP-BGA package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party