ADAQ4380-4BBCZ

ADAQ4380-4BBCZ is a quad-channel precision data acquisition (DAQ) signal chain μModule solution that reduces the development cycle of a precision measurement system by transferring the signal chain design challenges of component selection, optimization, and layout from the designer to the device. Using system-in-package (SIP) technology, the ADAQ4380-4 reduces end system component count by combining multiple common signal processing and conditioning blocks into a single device. These blocks include a quad-channel, high resolution 16-bit, 4MSPS simultaneous sampling SAR ADC, low noise, fully differential ADC driver amplifier, a 3.3V precision voltage reference, low noise buffer amplifiers, and low-dropout linear regulator. Applications include lab grade battery test system, motor control current sense, motor control position feedback, sonar, power quality monitoring, data acquisition system, erbium-doped fibre amplifier (EDFA) applications, I and Q demodulation.

• Easy to use μModule® data acquisition system, guaranteed 16-bit no missing codes
• On-chip oversampling function, 2-bit resolution boost, out of range indicator (active-low ALERT)
• Integrated fully differential ADC driver with signal scaling
• Single-ended to differential conversion, high-speed serial interface
• Conversion rate is 4MSPS maximum, conversion time is 190ns maximum
• Differential nonlinearity error is ±0.5LSB typical at (all gains, VS- = 0V)
• Common-mode rejection ratio is 80dB typical at (∆VICM/∆VOSDIFF)
• 12.5MHz typical -3dB bandwidth at (gain = 0.3)
• Signal-to-noise ratio is 91.6dB typical at (gain = 0.3)
• Operating temperature range from -40°C to +105°C, 81-ball CSP-BGA package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party