LT6015MPS5#TRMPBF

LT6015 is a single rail-to-rail input operational amplifier with input offset voltage trimmed to less than 50µV. These amplifiers operate on single and split supplies with a total voltage of 3V to 50V and draw only 315µA per amplifier. They are reverse battery protected, drawing very little current for reverse supplies up to 50V. The Over-The-Top® input stage of the LT6015 is designed to provide added protection in tough environments. The input common mode range extends from V– to V+ and beyond: these amplifiers operate with inputs up to 76V above V– independent of V+. Internal resistors protect the inputs against transient faults up to 25V below the negative supply. The LT6015 can drive loads up to 25mA and are unity-gain stable with capacitive loads as large as 200pF. Optional external compensation can be added to extend the capacitive drive capability beyond 200pF.

• Low power: 315μA/amplifier
• Operating temperature range from-55°C to 150°C
• VOS: ±50μV (maximum)
• CMRR, PSRR: 126dB
• Reverse battery protection to 50V
• Gain bandwidth product: 3.2MHz
• Specified on 5V and ±15V supplies
• High voltage gain: 1000V/mV
• No phase reversal, no supply sequencing problems

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party