LTC6102HVHMS8#TRPBF

LTC6102HV is a precision zero drift current sense, versatile, high voltage, high side current sense amplifier. It is a high supply voltage rating allows their use in many high side applications, while the low drift and offset ensure accuracy across a wide range of operating conditions. It monitors current via the voltage across an external sense resistor (shunt resistor). Internal circuitry converts input voltage to output current, allowing a small sense signal on a large common mode voltage to be translated to a ground-referred signal. Low DC offset allows the use of very low shunt resistor values and large gain-setting resistors. As a result, power loss in the shunt is reduced. The wide operating supply and high accuracy make the LTC6102 ideal for a large array of applications, from automotive, to industrial and power management. Application includes current, shunt measurement, battery monitoring, remote sensing, load protection, motor control, automotive controls.

• Supply voltage range from 4V to 60V (TA = 25°C, RIN = 10 ohm, ROUT = 10K)
• 25nV/°C typical input offset voltage drift (VSENSE = 100µV, TA = 25°C, RIN = 10 ohm, ROUT = 10k)
• 3µV typical input offset voltage (6V ≤ V+ ≤ 60V, TA = 25°C, RIN = 10 ohm, ROUT = 10k)
• 1µs typ input step response (6 ≤ V+ ≤ 60V, RIN = 100 ohm, ROUT = 4.99K, IOUT = 100µA)
• Gain configurable with two resistors
• 60pA typical input bias current (RIN = 40K, VSENSE = 2mV, TA = 25°C)
• 150dB typical power supply rejection ratio (VSENSE = 100µV, V+ = 6V to 60V, TA = 25°C)
• Maximum output current is 1A minimum at (6V ≤ V+ ≤ 60V, RIN = 1K, ROUT = 1K, VSENSE = 1.1V)
• 140KHz typical signal bandwidth (IOUT = 200µA, RIN = 100Ω, ROUT = 4.99k)
• 8 lead plastic MSOP package, specified temperature range from -40°C to 125°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party