LTM8074IY

LTM8074IY is a 40VIN, 1.2A continuous, 1.75A peak, step-down µModule® (power module) regulator. The Silent Switcher architecture minimizes EMI while delivering high efficiency at frequencies up to 2.2MHz. Included in the package are the switching controller, power switches, inductors, and all support components. Operating over an input voltage range of 3.2V to 40V, the LTM8074 supports an output voltage range of 0.8V to 12V and a switching frequency range of 200KHz to 2.2MHz, each set by a single resistor. Only the input and output filter capacitors are needed to finish the design. The low profile package enables utilization of unused space on the bottom of PC boards for high density point of load regulation. Applications include automotive battery regulation, power for portable products, distributed supply regulation, industrial supplies, wall transformer regulation.

• Low Noise Silent Switcher® architecture, CISPR22 Class B compliance
• Input voltage range from 3.2V to 40V, output voltage range from 0.8V to 12V
• External synchronization, configurable as an inverter
• Quiescent current into VIN is 3µA maximum at (RUN = 0V, TJ = 25°C)
• Load regulation is 0.5% typical at (0.1A < IOUT < 1.2A, TJ = 25°C)
• Switching frequency is 200KHz typical at (RT = 221K, VIN = 5V, TJ = 25°C)
• Peak output DC current is 1.75A minimum at (VOUT = 3.3V, fSW = 1.0MHz, TJ = 25°C)
• TR/SS current is 2µA typical at (TR/SS = 0V, TJ = 25°C)
• SYNC current is 5µA maximum at (SYNC = 2V, TJ = 25°C)
• Temperature range from -40°C to 125°C, 25-pin BGA package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party