MAX16972GTEB/V+

MAX16972GTEB/V+ is a 3A automotive high-speed USB protector. It provides high-ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. This device supports both High-speed USB (480Mbps) and full-speed USB (12Mbps) operation. In addition, this device includes integrated circuitry to enable fast charging for consumer devices that adhere to either the Apple® method or the Hi-Speed USB host-charger port-detection protocol and support USB on-the-go (OTG). The short-circuit protection features include short-to-battery on the protected HVBUS, HVD+, and HVD- outputs, as well as short-to-HVBUS on the protected HVD+ and HVD outputs. This device is capable of a short-to-battery condition of up to +18V. It is used in applications such as automotive radio and navigation, USB hub, automotive connectivity, telematics.

• 900MHz bandwidth USB 2.0 data switches, low enable polarity
• Current-limited 31mohm typical BUS switch with high capacitive load capability
• Short-to-battery and short-to-GND protection on protected HVBUS output
• Short-to-battery and short-to-HVBUS protection on protected HVD+ and HVD- outputs
• Integrated overcurrent and short-circuit auto-retry, 20ms fault-blanking timeout period
• On-channel -3dB bandwidth is 900MHz typical at (RL = 50 ohm, source impedance = 50 ohm)
• BUS power-supply range from 4.75V to 5.5V
• BUS input current is 572µA typical at (supply for internal blocks)
• Output DC current is 20µA minimum at (VG-DMOS - VBUS ≥ 7V), AEC-Q100 qualified
• Operating temperature range from -40°C to +105°C, 16-pin TQFN package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party