LQH32CN4R7M33L
Power Inductor (SMD), 4.7 µH, 650 mA, Shielded, LQH32CN_33 Series, 1210 [3225 Metric]
2,000 more incoming. You can reserve stock now
| Quantity | Price |
|---|---|
| 50+ | HK$1.620 |
| 250+ | HK$1.440 |
| 500+ | HK$1.290 |
| 1000+ | HK$1.140 |
| 2000+ | HK$1.010 |
Product Information
Product Overview
The LQH32CN4R7M33L is a wire wound surface mount High Frequency Inductor/Chip Coil with 1210 case. The wire wound inductor consists of a copper wire spirally wound around the ferrite core. The wire wound inductor for power circuits, coated with various resins over the copper wire wound around the ferrite core. The purpose of the coating resin is to improve the strength of the product. The merits of using a wire wound product are demonstrated when used in large current areas and high inductance areas. This inductor supports 43MHz minimum self-resonance frequency and ±20% inductance tolerance.
- -40 to 85°C Operating temperature range
Warnings
Do not use products beyond the rated current as this may create excessive heat.
Notes
Solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used.
Technical Specifications
4.7µH
Shielded
-
LQH32CN_33 Series
0.15ohm
3.2mm
2.5mm
No SVHC (21-Jan-2025)
650mA
43MHz
650mA
1210 [3225 Metric]
± 20%
Ferrite
2mm
Technical Docs (1)
Alternatives for LQH32CN4R7M33L
3 Products Found
Associated Products
3 Products Found
Legislation and Environmental
Country in which last significant manufacturing process was carried outCountry of Origin:Japan
Country in which last significant manufacturing process was carried out
RoHS
RoHS
Product Compliance Certificate