LPC1549JBD100E

The LPC1549JBD100 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 72MHz. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The device incorporates 256kB internal flash, 36kB internal RAM, 4kB EEPROM, two 12-channel 12-bit A/D converter with sample rates of up to 2Msps and 76 general-purpose I/O pins. This device also features peripherals like one full-speed USB 2.0 device, two SPI interfaces, three USARTs, a fast-mode plus I2C-bus interface and a CAN module.

• ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
• System tick timer
• Serial wire debug (SWD) with four breakpoints and two watch points
• Single-cycle multiplier supported
• Memory protection unit (MPU) included
• Simple DMA engine with 18 channels and 20 programmable input triggers
• GPIO Interrupt generation capability with boolean pattern-matching feature on eight external inputs
• Two GPIO Grouped port interrupts
• Switch matrix for flexible configuration of each I/O pin function
• CRC Engine
• Quadrature encoder interface (QEI)
• 24-bit 4-channel Multi-rate timer (MRT)
• Repetitive interrupt timer for general purpose use
• Windowed watchdog timer (WWDT)
• 12MHz Internal RC oscillator trimmed to 1 % accuracy
• Crystal oscillator with an operating range of 1MHz to 25MHz
• Integrated PMU (power management unit)
• Reduced power modes - Sleep mode, deep-sleep mode, power-down mode and deep power-down mode
• Wake-up from deep-sleep and power-down modes
• Timer-controlled self wake-up from Deep power-down mode
• Power-on reset (POR)
• Brownout detect (BOD)
• JTAG boundary scan modes supported
• Unique device serial number for identification

Applications

Motor Drive & Control, Power Management, Industrial, Medical, Consumer Electronics, Automation & Process Control, Building Automation