MC9S08SH32CTJ

The MC9S08SH32CTJ is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 32kB internal flash, 1kB internal RAM, 16-channel 10-bit A/D converter and 17 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps and one serial peripheral interface modules (SPI).

• HC08 Instruction set with added BGND instruction
• Support for up to 32 Interrupt/reset sources
• Security circuitry to prevent unauthorized access to RAM and flash contents
• Two very low power stop modes
• Reduced power wait mode
• Very low power real time interrupt for use in run, wait and stop
• Loop-control Pierce oscillator (XOSC)
• Internal clock source (ICS)
• Watchdog computer operating properly (COP) reset
• Low-voltage detection with reset or interrupt - selectable trip points
• Illegal opcode detection with reset
• Illegal address detection with reset
• Flash block protect
• 8-bit Modulo counter with 8-bit prescaler and overflow interrupt
• Two 2-channel Timer PWM modules (TPM1, TPM2)
• 8 Interrupt pins with selectable polarity
• Hysteresis and configurable pull up device on all input pins
• Configurable slew rate and drive strength on all output pins
• Single-wire background debug interface
• Breakpoint capability to allow single breakpoint setting during in-circuit debugging
• In-circuit emulation (ICE) debug module

Applications

Industrial