DRV8832DGQR

The DRV8832DGQR is a low voltage brushed DC Motor Driver with VOLTAGE REGULATION (IN1/IN2 Ctrl). It is suitable for battery-powered toys, printers and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFETs configured as an H-bridge to drive the motor winding. Provided with sufficient PCB heat sinking, it can supply up to 1A of DC/RMS or peak output current. The device operates on power supply voltages from 2.75 to 6.8V. To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided. An input pin allows programming of the regulated voltage. A built-in voltage reference output is also provided.

• Efficient PWM voltage control for constant motor speed with varying supply voltages
• Overcurrent and short-circuit protection
• Under-voltage lockout and over-temperature protection
• Reference voltage output
• Current limit circuit
• Fault output
• 450mΩ (HS + LS) Low MOSFET on-resistance
• 300nA Typical sleep mode current
• Green product and no Sb/Br

Applications

Motor Drive & Control, Portable Devices, Computers & Computer Peripherals, Robotics, Consumer Electronics