PTH08080WAH
Non Isolated POL DC/DC Converter, ITE, DIP, 10 W, 900 mV, 5.5 V, 2.25 A
Need more?
| Quantity | Price |
|---|---|
| 1+ | HK$169.490 |
| 5+ | HK$148.300 |
| 10+ | HK$122.880 |
| 50+ | HK$110.170 |
| 100+ | HK$101.690 |
| 250+ | HK$96.470 |
Product Information
Product Overview
The PTH08080WAH is a highly integrated Switching Regulator Module that delivers up to 2.25A of output current. The input voltage range of the PTH08080WAH is from 4.5V to 18V, allowing operation from either a 5V or 12V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08080W can step down to voltages as low as 0.9V from a 5V input bus, with less than 1W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9V to 5.5V, using a single external resistor. Operating features include an under voltage lockout (UVLO), on/off inhibit, overcurrent protection and over temperature protection. Target applications include telecommunications, test and measurement applications and high-end consumer products.
- Enable Tracking
- Efficiencies up to 93%
- On/Off Inhibit
- Fixed Soft Start
- Undervoltage Lockout (UVLO)
- Output Overcurrent Protection (Nonlatching, Auto-Reset)
- Over temperature Protection
Applications
Communications & Networking, Sensing & Instrumentation
Warnings
ESD sensitive device, take proper precaution while handling the device.
Technical Specifications
ITE
10W
5.5V
Adjustable
18V
15.24mm
-
DIP
900mV
2.25A
4.5V
8.18mm
12.7mm
Legislation and Environmental
Country in which last significant manufacturing process was carried outCountry of Origin:Mexico
Country in which last significant manufacturing process was carried out
RoHS
RoHS
Product Compliance Certificate