CYW43439KUBGT

CYW43439KUBGT is a highly integrated single-chip solution and offers the lowest RBOM in the industry for smartphones, tablets and a wide range of other portable devices. The chip includes a 2.4GHz WLAN IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.0 compliance. In addition, it integrates a power amplifier (PA) that meets the output power requirements of most handheld systems, a low-noise amplifier (LNA) for best-in-class receiver sensitivity and an internal transmit/receive (iTR) RF switch. The WLAN host interface supports gSPI and SDIO v2.0 modes, providing a raw data transfer rate up to 200Mbps. When operating in 4-bit mode at a 50MHz bus frequency an independent, high-speed UART is provided for the Bluetooth host interface.

• Supports a battery voltage range from 3.0V to 4.8V with an internal switching regulator
• Programmable dynamic power management
• 4Kbit one-time programmable (OTP) memory for storing board parameters
• Can be routed on low-cost 1 x 1 PCB stack-ups
• Adaptive frequency hopping (AFH) for reducing radio frequency interference
• Low-power consumption improves battery life of handheld devices
• Case style is 63-ball WLBGA halogen-free package (4.87mm x 2.87mm, 0.40 pitch)
• Supply voltage range is 3V to 4.8V
• Operating ambient temperature is –30°C to +70°C