TLE4972EVALINLAYTOBO1

TLE4972EVALINLAYTOBO1 is an XENSIV™ - TLE4972 EVAL INLAY current sensor evaluation board suitable for evaluating three-phase systems, with currents up to 420A. The board is equipped with three TLE4972-AE35D5 Hall current sensors assembled on top of the PCB over an internal copper inlay 1mm thick. TLE4972 evaluation board is developed to familiarize the users with TLE4972 current sensor for design in support and evaluation purposes. The evaluation board is used in combination with the Infineon programmer board. The programmer board supplies the sensors on the evaluation board and allows a fast and easy interfacing to each sensor. If the programmer board is not used, power supply has to be provided externally by the user. Suitable for automotive electrical drives, auxiliary drives, current monitoring, overload and over-current detection, automotive power train, battery main switch, on-board chargers applications.

• Measurement of three-phase currents, up to 420A, external current rail
• Based on TLE4972-AE35D5 current sensors
• On board EEPROM to store board settings
• On board LDO (Low Drop Out) regulator to stabilize voltage of sensors
• Board can be used either standalone or interconnected with TLE4972 current sensor programmer tool
• Compatible with the TLE4972 current sensor programmer evaluation tool
• Typical current rail transfer factor is 45.80µT/A
• 2.84mV/A typical evaluation board sensitivity
• Semi-differential output mode