You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
MIC4420YN
MOSFET Driver Single, Low Side Non-Inverting, 4.5V-18V supply, 6A peak out, 1.7 Ohm output, DIP-8
- Manufacturer:
- MICREL SEMICONDUCTOR MICREL SEMICONDUCTOR
- Manufacturer Part No:
- MIC4420YN
- Order Code:
- 1556744
- Technical Datasheet:
- MIC4420YN Datasheet
Alternatives for MIC4420YN
Product Overview
The MIC4420YN is a CMOS non-inverting MOSFET Driver capable of 6A (peak) output and can drive the largest MOSFETs with an improved safe operating margin. The MIC4420 accepts any logic input from 2.4V to VS without external speed-up capacitors or resistor networks. Proprietary circuits allow the input to swing negative by as much as 5V without damaging the part. Additional circuits protect against damage from electrostatic discharge. This driver can replace three or more discrete components, reducing PCB area requirements, simplifying product design. Modern BiCMOS/DMOS construction guarantees freedom from latch-up. The rail-to-rail swing capability insures adequate gate voltage to the MOSFET during power up/down sequencing.
- Latch-up protected - Will withstand >500mA reverse output current
- Logic input will withstand negative swing up to 5V
- Output voltage swing to within 25mV of ground or VS
- 10000pF High capacitive load drive
- 2.5R Low output impedance
- 6pF Typical Low equivalent input capacitance
Applications
Automation & Process Control, Portable Devices, Sensing & Instrumentation
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- 1Channels
- :
- Low Side
- :
- MOSFET
- :
- 8Pins
- :
- DIP
- :
- Non-Inverting
- :
- 6A
- :
- 6A
- :
- 4.5V
- :
- 18V
- :
- -40°C
- :
- 85°C
- :
- 18ns
- :
- 48ns
- :
- -
- :
- -
Technical Docs (2)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
No Longer Stocked
HK$17.04
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
| Quantity | Price | Your Price |
|---|---|---|
| 1+ | HK$17.04 | |
| 25+ | HK$14.27 | |
| 100+ | HK$12.97 | |
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool