MCP4013T-103E/CH

MCP4013T-103E/CH is a low-cost 64-step volatile digital POT. It is a volatile, 6-bit (64 wiper steps) digital potentiometer with a simple up/down serial interface. It offers a variety of configurations simplifying design while minimizing cost, package size, and pin count. It offers a voltage divider (potentiometer), with one terminal connected to the ground. This device operates from a single 1.8V-5.5V supply and draws less than 1µA while operating in the static state.

• Potentiometer wiper configuration, RAM memory type
• Mid-scale POR wiper setting, 10Kohm resistance
• 75 ohm wiper resistance, 64 no of steps, U/D control interface
• Power-up to midscale, ratiometric Tempco (potentiometer) is <lt/>10ppm typical
• Low wiper resistance is 70 ohm typical, 64 taps resolution
• Supply current is 45µA typical at (5.5V, CS = VSS, fU/D = 1MHz)
• Operating temperature range from –40°C to +125 °C
• 6-LD SOT-23 package
• High-voltage tolerant digital inputs is up to 12.5V
• Power-on recall of default wiper setting

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.