76-046

The 76-046 from Tenma is a red colour 4mm banana tip probe to right angle 4mm male banana plug lead. It is used to get safe probes or pincer clips from a DMM (Digital MultiMeter) with 4mm banana sockets on the front face. It has electrical safety according to EN / IEC 61010-031:2008 :1000V CAT II/1000V CAT III/600V CAT IV if the cap is set-up, reinforced insulation, up to 36A (at +40°C) depending on the wire. The cap can be removed or set-up depending on the electrical environment. The design and the material of lantern contact springs meet the need of low resistance and reliability. It also has double jacket wire to offer a wire wear indicator. The lead features insulating grey tips on the 4mm banana male connections to prevent accidental contact.

• Visible length of the wire is 1m (100cm)
• Pollution degree 1 or 2
• Operating temperature range from -20°C to +80°C
• Nickel coated brass and red annealed copper conductor material
• Silicone wire jacket, insulator and lantern contact spring
• Voltage, current and European union markings on lead
• Cross section of 0.75mm²
• 12 month limited warranty *view Terms & Conditions for details

Warnings

Keep behind the barriers to operate safely the lead while connecting to hazardous live voltages (more than 33VAC and 70VDC).