2864480..

The MINI MCR-SL-UI-REL is a MCR Limit Value Switch with adjustable hysteresis and delay time, with screw connection. The 6.2mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL is used to control and monitor analogue standard signals. On the input side, the analogue standards signals 0 to 20mA or 0 to 10V per DIP switch can be set. On the output side, a relay with PDT contact is available. The switching thresholds are set via potentiometer. The relay status is indicated by a yellow LED on the front of the housing. Power (19.2 to 30VDC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

• 3-way isolation
• Configuration of the switching hysteresis
• Configuration of the operating and closed circuit current behaviour
• Setting of relay pickup times
• Setting of dropout delay
• Power supply possible via the foot element (TBUS)
• Highly-compact threshold value switch for switching analogue limit values
• Status and error indication via two diagnostic LEDs
• Operating current/closed circuit current switch-over
• PDT relay at output
• Limit value can be freely adjusted via potentiometer on the front
• Input signal, hysteresis and delay time can be configured via DIP switches

Applications

Test & Measurement