P2056 500 MHZ 10:1 PASSIVE PROBE

P2056 2PK is a 10:1 miniature probe (dual pack) for oscilloscope with up to 500MHz bandwidth. The entire probe core is made of a high-quality CeramCore™ ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 attenuator by scopes such as the PicoScope 6000E Series that feature a sense ring. The compact design with its 2.5mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5mm housings.

• 700ps probe resistance
• Compatible with PicoScope 6000E Series 500MHz oscilloscopes
• 1Mohm scope input impedance
• 10Mohm resistance at probe tip and 9.5pF capacitance at probe tip
• IEC/EN 61010-031 safety standard
• 1.3m cable length
• 1.3m cable length

Contents

2 x P2056 500MHz passive probes, 1 x coding rings (set) 3x4 colours, 2 x ground lead 15cm, 2 x ground spring 2.5mm, 2 x insulating cap 2.5mm, 2 x sprung hook 2.5mm, 1 x trim tool, 2 x solid tip CuBe 0.5 mm, 2 x spring tip gold plated 0.5mm.