STM32L100RCT6

The STM32L100RCT6 is an ultra-low-power Microcontroller incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex®-M3 32-bit RISC core operating at a frequency of 32MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 256kb and RAM up to 16KB) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offers one 12-bit ADC, two DACs, two ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases. Moreover, the device contains standard and advanced communication interfaces up to two I²Cs, three SPIs, two I2S, three USARTs and an USB. It also includes a real-time clock and a set of backup registers that remain powered in standby mode.

• Ultra-low-power Platform
• ARM® Cortex®-M3 32-bit CPU Core
• Low-power, Ultra-safe BOR (Brownout Reset) with 5 Selectable Thresholds
• Ultra-low-power POR/PDR
• Programmable Voltage Detector (PVD)
• 1 to 24MHz Crystal Oscillator
• 32kHz Oscillator for RTC with Calibration
• High Speed Internal 16MHz
• Internal Low-power 37kHz RC
• Internal Multispeed Low-power 65kHz to 4.2MHz
• PLL for CPU Clock and USB (48MHz)
• USB and USART Supported
• Serial Wire Debug Supported
• JTAG Supported
• 51 Fast I/Os (42 I/Os 5V Tolerant), All Mappable on 16 External Interrupt Vectors
• 256kb Flash Memory with ECC
• 16kb RAM
• 4kb True EEPROM with ECC
• 20-byte Backup Register
• LCD Driver for up to 8 x 28 Segments
• DMA Controller 12x Channels
• 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit Basic Timers, 2x Watchdog Timers and 10x Timers
• CRC Calculation Unit

Applications

Embedded Design & Development, Signal Processing, Computers & Computer Peripherals

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.