PRIMER NO 3, 100ML

Primer No. 3 primer is a specially formulated primer for use with addition and condensation/moisture curing 1K and 2K RTV silicone sealants and elastomers. This primer imparts good adhesion to most metals, natural and synthetic rubber, polyester and nylon fabrics. It is recommended as a primer for use on non-porous surfaces. In some cases, this product has also been found to act as a barrier to substrates that usually cause inhibition to platinum cure systems.

• Volume is 100ml, dispensing method is container
• Cure profile is 23+/-2°C and 50+/-5% humidity
• Colour is pale yellow
• Density is 0.8g/cm³ (BS ISO 2781)
• Flash point is 43°C (BS 2000-34)
• Odour is solvent
• Storage temperature is 5°C minimum, 30°C maximum
• Shelf life is 12months

Notes

Not suitable for polycarbonate and acrylic.